/* connect to UDP server */
> AT+QIOPEN=1,0,"UDP","udp.os.1nce.com",4445,0,1
OK
+QIOPEN: 0,0



> AT+QISEND=0
> Welcome to 1NCE OS
SEND OK

> AT+QICLOSE=0

OK

Preparation

Configure the BG95 module with the appropriate network settings, such as the APN and operator ID, and ensure that it is connected to the cellular network.

Open socket

Use the AT+QIOPEN command to open a UDP socket and establish a connection with the remote server.

Send the message to 1NCEOS

for Send After receiving ">", input data (TEST), the maximum length of the data is 1460, the data beyond 1460 will be omitted. Then use <CTRL+Z> to send data. When receive SEND OK means the data has been sent

Close the Socket

AT+QICLOSE command is used to close a socket connection established with a remote server using a TCP or UDP protocol. The command requires specifying the socket ID that was assigned when the connection was opened.